-
Step 1 — Lock the Requirement Before You Dial
-
Step 2 — Source the FARO Portable CMM From a Channel That Has One on the Shelf
-
Step 3 — Call for Stock Before You Compare Price on the Fluke 1587 FC and 1555
-
Step 4 — Rice Lake Weighing Systems: the "Programming Language" Question Points the Wrong Way
-
Step 5 — Negotiate the Rush Premium Correctly
-
Step 6 — Confirm Calibration Traceability Before You Place the Order
-
Step 7 — Build the Receiving Checklist Before the Order Confirms
-
Cautions: Mistakes That Will Eat Your Emergency Budget
I run rush orders at a metrology systems integrator. Over the last seven years, I've handled 200+ expedited jobs — 48-hour turnarounds, weekend freight, factory-down emergencies that started with a phone call at 11 p.m. and ended with a calibration certificate sitting on a loading dock before dawn.
The pattern is almost always the same. The line is down. A customer calls with a 24-to-72-hour window. They need a FARO portable CMM on-site, or they've just found out their Fluke insulation tester is dead, or they're trying to fix a Rice Lake weighing system that nobody on staff fully understands.
Here's the 7-step checklist I actually use. Not the theoretical one — the one written on a sticky note next to my monitor.
One opinion up front: if the alternative is missing a shutdown deadline, pay the rush premium. You're not buying speed. You're buying certainty. The cost of a missed restart is almost always larger than the expedite fee.
Step 1 — Lock the Requirement Before You Dial
Most failed rush orders fail here. Not at the vendor, not at the shipper — at the customer's own spec sheet. Someone says "we need a FARO portable CMM," the vendor ships a ScanArm, and the customer actually needed a Vantage laser tracker for a 30-meter volume.
Have these three things on paper before you make the first call:
- The model number, not the product category.
- The measurement volume and accuracy tolerance.
- Whether the asset must come with a fresh calibration certificate or whether an existing certificate is acceptable.
If you can't fill those three in, your vendor is going to guess. Guessing on a rush order is how you end up paying $4,000 in freight for the wrong instrument.
Step 2 — Source the FARO Portable CMM From a Channel That Has One on the Shelf
FARO makes excellent hardware. The problem with rush FARO orders isn't quality — it's availability. A FARO portable CMM (ScanArm, Quantum, Vantage) is usually a configured unit, and the factory lead time with a calibration certificate runs weeks, not days.
So the question on a 48-hour clock isn't "who sells FARO." It's "who has a demo unit, a loaner, or a stocked configuration with a current cert." That narrows the field fast.
In March 2024, I had a Tier-1 automotive supplier facing a 60-hour plant restart. I needed a FARO ScanArm. Two authorized resellers told me 3-4 weeks. The third had a demo unit available for rental with a same-day cert. That's the phone call that matters.
For reference, new FARO portable CMM pricing in 2025 generally sits in the $30,000-$120,000 range depending on configuration (based on publicly listed reseller pricing, January 2025; verify current quotes).
I don't have hard data on FARO demo unit availability across the channel, but based on our own five years of rush orders, my sense is that about one in three expedited requests can be filled from existing demo stock. Most of the time you have to arrange a loaner or accept a slightly different configuration.
Step 3 — Call for Stock Before You Compare Price on the Fluke 1587 FC and 1555
Fluke 1587 FC insulation multimeters and Fluke 1555 insulation testers sit in a different category. These are standard test instruments that exist in stock everywhere, which means on a rush order, price comparison is actually worth doing.
But the order matters: check stock first, then check price. If you're hunting for a 1587 FC insulation multimeter and you spend two hours comparing national distributor pricing, only to find the top three are backordered, you've burned hours you could have spent on freight.
In Q3 2024, we priced the 1587 FC across six vendors. The quoted spread was 18% for the same instrument. But only two of those vendors could get it to the customer's site within two days. Stock risk dominated price on that job.
Fluke 1587 FC insulation multimeter: typically $450-$550. Fluke 1555 insulation tester: typically $3,000-$4,000. Prices based on major distributor listings, January 2025; verify current pricing.
Step 4 — Rice Lake Weighing Systems: the "Programming Language" Question Points the Wrong Way
A customer recently stopped a procurement call to ask me: "what is Rice Lake weighing systems programming language?"
Honest answer: Rice Lake doesn't sell you a weighing system that you program in a language. Their iQUBE2 and Revolution software are proprietary configuration environments. You're configuring settings, not writing code. When integration is needed, it runs through protocols — serial, EtherNet/IP, Modbus — into a PLC, usually Allen-Bradley or Siemens.
I put this in the checklist because the wrong answer changes how you buy in a hurry. If your procurement team goes hunting for a "Rice Lake weighing systems programming language," they'll end up looking for a software license. What you actually need is either the configured system itself or an integrator who can commission it on-site inside 48 hours and make sure the PLC side is talking to it.
I don't have precise percentage data on how often Rice Lake emergency installs need PLC-side participation, but from our own orders over the past five years, my sense is roughly one in three. The phone line to the PLC integrator is usually the critical path, not the weighing terminal.
Step 5 — Negotiate the Rush Premium Correctly
This is where the opinion actually does some work.
A rush premium is not a vendor gouging you. It's pricing inventory, staff time, and shipping priority to actually push you ahead of someone else's queue. The deal you can make is not "can you waive the premium" — it's "what time certainty am I buying for the premium."
Ask the specific question: "If I pay for tomorrow's freight, what delivery time are you actually committing to?" If the answer is "probably," "usually," or "should be," then the premium is buying noise. You want a concrete delivery commitment, and you want it in the confirmation email.
Rush fee structures typically look like this: next-business-day freight at +50-100% over standard, 2-3 day at +25-50%, same-day (when it exists) at +100-200%. Based on major supplier fee structures, 2025.
Step 6 — Confirm Calibration Traceability Before You Place the Order
An instrument that arrives without the right traceability is an instrument that didn't arrive.
For FARO equipment that means confirming the calibration certificate was issued by an ISO 17025 accredited lab, dated inside the acceptable window, and traceable to the standard your customer actually works to. For the Fluke 1587 FC and 1555, factory calibration is usually fine, but on regulated work you need the third-party certificate.
Strangely, this is the step that gets skipped most often. Ask for the certificate PDF on the phone, not after the box arrives. On a 48-hour clock, the hours you spend discovering the wrong certificate are the hours you spend waiting for a corrected one.
Step 7 — Build the Receiving Checklist Before the Order Confirms
I learned this one the hard way. In my first year, I signed off on a rush FARO order receiving check without confirming the accessory case. The instrument arrived with a different probe case configuration. We lost 30 hours of customer-side time because nobody had opened the packing list on the phone.
Write it down. Verify against the exact order you placed:
- Serial number and model number match.
- Accessory case and all listed items are present.
- Calibration certificate date and lab name.
- No mismatch between the invoice and the serial number on the box.
- A power-on check within 24 hours of arrival.
On a rush order, the unboxing check isn't the handoff. It's the starting point for the next move.
Cautions: Mistakes That Will Eat Your Emergency Budget
Assuming "standard" means the same thing to everyone. The classic beginner error. I once assumed "standard accessories" on a FARO quote included the shipping case. It didn't. That mistake cost $600 and a day. Now I write "shipping case included" into the spec sheet explicitly.
Mixing up the rush premium with freight. They're separate line items. Sometimes they get folded together by the vendor. Ask for a broken-out quote; it forces clarity on what the premium is actually buying.
Confirming stock before the price is locked. Your phone conversation confirming availability is not the same as stock being committed. Ask the distributor for an available serial number — then for the price. In that order.
Skipping the PLC side. Especially on Rice Lake weighing systems. You can buy the terminal and still miss the deadline, because the critical path is the PLC integrator getting access to the line.
None of this is glamorous. A checklist isn't supposed to be. It's supposed to get you past the deadline — and on an emergency order, that's the whole point.
Leave a Reply